Led video wall screen details

Credit :

SUNSHINE LED SCREEN:

www.sunshinedisplaysystem.com

https://www.youtube.com/user/sunshineLED1

+91-7837978199 -9988153750-9996459787

There are some world famous LED Driving IC manufactures such as SONY ,TOSHIBA, MBI ,  TI , SITI, Supertex and so on, different manufactures produce different chips with different functions to meet customer’s different requirements, such as error detection, Current Gain ,Smart power saving ,dot correction ,low current, S-PWM, time-multiplexing, open detection, high gray scale, high refresh rate and so on.Ben did some research on it. 

I’d like to introduce MBI series to everybody due to its  high cost performance driving IC . Macroblock Inc. is Taiwan’s leading manufacturer of LED Driver ICs with a Top Ten ranking in the world for LED Driver chips., which takes up more than 90%,Macroblock’s vision is to “Play a key role in lighting up LEDs in all kinds of applications”LED Drivers enables many functions for LEDs to perform more efficiently, effectively and precisely. Features like constant current, charge pump, fault detection, pulse width modulation etc are necessary in many LED applications and installations.  

 

For commercial advertising use, common items are MBI5024 or MBI5026 , they are both of low current and high precision, good for value. If customers want to pay less for electricity bill, MBI5035 can make it, because it is new in the market and is of low power consumption.

If customers need special functions such as error detection and Current Gain ,MBI5034, MBI5036 or MBI5039 are good options.

In the market,MBI5030,MBI5031,MBI5040,MBI5041,MBI5042 and MBI5050 belong to high-grade IC.  

MBI5030/MBI5031 have Low current S-PWM , MBI5040 have digital dot correction. MBI5041 and MBI5042 are of high refresh rate and high gray scale grade. MBI5050 owns SPWM technology to enhance utilization of LEDs ,slow down transmission speed to pass EMI test, obtain high refresh rate and high gray scale grade and so on. MBI5050 is the leader of all MBI series.   

It can be concluded that , MBI5024,5026 is widely used for common led display screens with good price. MBI5024 VS MBI5042.

 MBI5035 is strongly recommended for low power consumption LED advertising screens like billboards, LED video walls etc, it is new and outstanding in the market. MBI5041 and MBI5042 are suitable for sports screens, amusement screens, TV studio screens and etc which need very high refresh rate and high gray scale grade. MBI5050 integrate most of the functions and talent, so its price is the most expensive, if customer can afford, it is ok. MBI5050 VS MBI5042.  MBI5041

All in all,  choosing the right IC for customers to use in the right place is the right thing seller and manufacturer should do. If there is any question, welcome to contact Ben.

  

 An LED display is a flat panel display, which uses light-emitting diodes as a video display. An LED panel is a small display, or a component of a larger display. They are typically used outdoors in store signs and billboards, and in recent years have also become commonly used in destination signs on public transport vehicles or even as part of transparent glass area. LED panels are sometimes used as form of lighting, for the purpose of general illumination, task lighting, or even stage lighting rather than display.

There are two types of LED panels: conventional (using discrete LEDs) and (SMD) panels. Most outdoor screens and some indoor screens are built around discrete LEDs, also known as individually mounted LEDs. A cluster of red, green, and blue diodes is driven together to form a full-color pixel, usually square in shape. These pixels are spaced evenly apart and are measured from center to center for absolute pixel resolution. The largest LED display in the world is over 500 meters long and is located in Suzhou, China, covering the Yuanrong Times Square. which is 160 × 72 ft (49 × 22 m), 11,520 square feet (1,070 m²).

Most indoor screens on the market are built using SMD technology —a trend that is now extending to the outdoor market. An SMD pixel consists of red, green, and blue diodes mounted in a single package, which is then mounted on the driver PC board. The individual diodes are smaller than a pinhead and are set very close together. The difference is that the maximum viewing distance is reduced by 25% from the discrete diode screen with the same resolution

Indoor use generally requires a screen that is based on SMD technology   . This will usually be more than sufficient for corporate and retail applications, but under high ambient-brightness conditions, higher brightness may be required for visibility. Fashion and auto shows are two examples of high-brightness stage lighting that may require higher LED brightness.  , the requirement will often be for lower brightness levels with lower  ;  which is much bluer than the common lighting on a television production set.

For outdoor use, at least 2,000 cd/m² is required for most situations, whereas higher-brightness types of up to 5,000 cd/m² cope even better with direct sunlight on the screen. (The brightness of LED panels can be reduced from the designed maximum, if required.)

Suitable locations for large display panels are identified by factors such as line of sight, local authority planning requirements (if the installation is to become semi-permanent), vehicular access (trucks carrying the screen, truck-mounted screens, or cranes), cable runs for power and video (accounting for both distance and health and safety requirements), power, suitability of the ground for the location of the screen (if there are no pipes, shallow drains, caves, or tunnels that may not be able to support heavy loads), and overhead obstructions.

Flat Panel LED Television Display

Possibly the first true all LED flat panel television screen was developed, demonstrated and documented by J. P. Mitchell in 1977. The modular, scalable display was initially designed with hundreds of MV50 LEDs and a newly available  memory addressing circuit from   The ¼ in thin flat panel prototype and the scientific paper were displayed at the 29th ISEF expo sponsored by the   Washington D.C. May 1978. The technical display received awards and recognition  Awards included and recognition from faculty and area Universities and the LED prototype remains operational. An  (liquid crystal display) matrix design was also cited in the LED paper as an alternative x-y scan technology and as a future alternate television display method. The replacement of the 70 year+ high-voltage analog system  with a digital x-y scan system has been significant. Displacement of the electromagnetic scan systems included the removal of inductive deflection, electron beam and color convergence circuits. The digital x-y scan system has helped the modern television to “collapse” into its current thin form factor.

In 1978, Mitchell also submitted his paper to the Westinghouse Science Talent Search contest, where he received an Honorable Mention.

Mitchell also presented his paper at the 90th Session of The Iowa Academy of Science April 21–22, 1978, at the  .

The 1977 model was monochromatic by design. Efficient blue LEDs did not arrive for another decade. Large displays now use high-brightness diodes to generate a wide spectrum color palette. It took three decades and for Sony to introduce an LED TV: the OLED screen which was marketed in 2009.

The Largest 3D LED Television Display

between Manchester United and Barcelona was broadcasted live in 3D format in Gothenburg (Sweden). The football match was broadcasted on  screen.  Ukrainian produced 3D Led TV makes   The live 3D broadcast was provided by the Swedish company Viasat. 

 LED text displays

LED text displays refer to types that are specialized and limited to display of alpha-numeric characters. Most types display either one character or a group of characters. One character is generally displayed by a matrix of LED’s, or by a matrix of segments.

Application-specific variations

Flashing LEDs are used as attention seeking indicators without requiring external electronics.

Flashing LEDs resemble standard LEDs but they contain an integrated multivibrator circuit

that causes the LED to flash with a typical period of one second.

In diffused lens LEDs this is visible as a small black dot. Most flashing LEDs emit light of one

color, but more sophisticated devices

can flash between multiple colors and even fade through a color sequence using RGB color mixing.

Bi-color LEDs are two different LED emitters in one case. There are two types of these.

One type consists of two dies connected to the same two leads antiparallel to each other.

Current flow in one direction emits one color, and current in the opposite direction

emits the other color. The other type consists of two dies with separate leads for both

dies and another lead for common anode or cathode, so that they can be controlled independently.

Tri-color LEDs are three different LED emitters in one case. Each emitter is connected to

a separate lead so they can be controlled independently.

A four-lead arrangement is typical with one common lead (anode or cathode) and an additional lead for each color.

RGB LEDs are Tri-color LEDs with red, green, and blue emitters, in general using a four-wire connection with one common lead (anode or cathode). These LEDs can have either

common positive or common negative leads.

Others however, have only two leads (positive and negative) and have a built in tiny electronic control unit.

Calculator LED display, Alphanumeric LED displays are available in seven-segment and starburst format.

Seven-segment displays handle all numbers and a limited set of letters.

Starburst displays can display all letters.

Sports stadium LED displays are used on indoor to give the score and time or relay

broadcasting the composition.

Because there are many lights in the stadium, the brightness must above 1000nits.

It needn’t too higher viewing distance. But high refresh frequency is absolutely necessary .

It needn’t too higher protection grade, but it must have soft mask and soft top cover to

protect the display.Due to the Sports stadium LED displays maybe used in composition,

it is necessary have higher resolution so that can check out the score at any time.

And there must have many audiences, so good viewing angle is also very necessary.

The viewing angle should be wider than common used.

Entertainment LED display screen is suitable for the television studio and digital

stage background.Stage background LED display is one of the applications of

transparent curtain LED screen display, which has the features of light weight,

transparent screen with curtain, strips, mesh, net shape rather than solid or stereo,

usually big pixel pitch so cost-effective.
It’s usually used as outdoor and indoor stage background, backlight, back wall video

display, which can highlight remote image effect with bright and colorful light.
The commonly used pixel pitch is P10, P12, P14, P16, P20, P25, P31.25, P37.5

according to the customers’ demands.

It usually has no fans and no noise pollution, long lifetime and friendly to the

environment. And it also has simple maintenance with its transparent screen.
The applications of the background led display include:
1. High-grade entertainment
2. Large-scale song and dance soiree
3. Fashion conference
4. Outdoor advertising
5. Building wall decorations etc.

Mobile led display is an innovative outdoor display which includes the trailer,

roof type and the sidewall structure. The common model of mobile trailer is PH10

. Mobile trailer led screen is a very fast growing which contains the big three sided

trailer led screen, double sided trailer led screen and one sided small truck led screen,

etc. It becomes very popular in advertising field and attracts more and more attention

than the fixed installation led display. Mobile trailer led screen are widely used on

street and living quarters where many people can found.
As we know, mobile led display is major for outdoor mobile advertisement, so it is

special for power, energy, shockproof and so on. In order to achieve that, the control

system should be stable and the combination of the cabinets should be perfect, double

copper technology improves the stability of the system, good thermal conductivity

and telecommunications parameters and strengthens shockproof, the driving mode

can be low down to ensure the power supply.

Rental led display includes indoor and outdoor led panel, and there are magic clear

panel, curtain wall panel, mesh led panel, raster screen and light bar panel.
The main characteristics of rental led display are: convenient to move and independent

design of cabinets and easy to install. Rental indoor led display’s cabinets are usually cast-aluminium cabinet and the ultrathin aluminium cabinet, so it is easy to remove and install.

The packing is usually the flight case which used for rental. Rental outdoor led display

includes small pixel pitch of high definition, medium pixel pitch of standard definition and

long pixel pitch of economical led display.
The latest development of hanging structure of rental led display allows the hanging

of both the independent cabinet and the whole screen, which not only makes

the installation and the use of cabinet more convenient bur also increases the

practicality of the screen body.

As a movable media, there are some things different with the fixed installation

commercial LED screen:
1. Lock button
2. Hanging cabinets inner structure
3. Hanging beam
4. Bottom Bracket
5. Flight case
We can offer all kinds of rental use LED screen: indoor stage rental LED screen,

outdoor events rental LED display screen.
For the rental use LED screen: flight case, luck button & hanging structure is

always necessary since the screen needs to move from one site to another

very frequently and only use several days for each event.

More details please contact us

Commercial advertising LED screen includes indoor and outdoor screen display.

It is usually with full color as it is often showing motive video and colorful picture

one by one for advertising.

Indoor advertising screen usually has small pixel pitch, like P4, P5, P6, P7.62, P8,

P10, P12, among which P6, P7.62 are the most popular for its high definition and

more cost effect than P4 and P5, and also indoor LED screen usually has smaller

screen size, so with smaller viewing distance to adapt the indoor limited space.

For example, it can be used as advertising billboard in an exhibition hall with

collected audience, in a house or room with a campaign or activity or a party

or a ceremony.

Outdoor commercial advertising LED screen display like the outdoor big stage,

square, street, hanging over the air outdoor etc. It is usually with bigger pixel

pitch like P10, P12, P14, P16, P20, P25 and even bigger, with bigger screen size

so bigger viewing distance to notice broader range of audience. It has higher

dust and water protection grade like IP65, which means it can completely

prevent tiny dust ingress and it won’t be damaged at all with water washing.

arc and 360-degree arc led display is an innovative shape display, which attracts more

attention by arc shape. According to the size of arc, it’s divided into general

curve led display and column-shaped display. Because of its advantages of various

angles, shape structures, anti-electromagnetic interference and so on, the arc and 360-degree arc led display are mainly used at commercial streets, the shopping center

and distributed advertising.

The main characters of arc led displays are its exquisite design of the arc-shape structure, seamless combination of the cabinets and the harmony with

the surrounding, so the led display can work well; its module mask of high

homogeneity fits perfectly with the modules, the evenly color of the masks

no color cast or shadow no matter from what angle.; The brightness of the

screen is adjustable to achieve the best effect both day and night; Of course,

it is attractive by the audiences.

Digital billboard is a billboard that creates digital images that are changed by

a computer every few seconds. Digital billboard are primarily used for

advertising, but they can also serve public service purposes.
Information showing system is the main use of led digital billboard: train

station and bus station digital billboard, airport information showing system,

street shop led message board.
The advantage of digital led display is updating information in time, which

can show the change of temperature, the humidity, and the score.